Multiple Choice
Identify the
letter of the choice that best completes the statement or answers the question.
|
|
| 1. | Whenever you
begin a new drawing, AutoCAD creates a new drawing called a. | DRAWING.DWG. | c. | DRAWING.DXF. | b. | DRAWING.BMP. | d. | DRAWING.CAD. | | | | |
|
|
| 2. | When the
MEASUREINIT system variable is set to zero, the drawing settings are based on the
template a. | ACADTemp.DWT. | c. | ACAD.DWT. | b. | ACADISO.DWT. | d. | Both b and c | | | | |
|
|
| 3. | What are the
two pages found in the Quick Setup dialog box? a. | Units and Area | c. | Angle and Area | b. | Units and
Precision | d. | Angle and Angle
Direction | | | | |
|
|
| 4. | An AutoCAD
template is a drawing file with a file extension of a. | .DWG. | c. | .CAD. | b. | .DWT. | d. | All of the above | | | | |
|
|
| 5. | When you
select the Start from Scratch option, AutoCAD provides what two options? a. | English and
Metric | c. | Only
English | b. | Only Metric | d. | None of the above | | | | |
|
|
| 6. | The AutoCAD
screen consists of the following: a. | Graphics window | c. | Command window | b. | Toolbars | d. | All of the
above | | | | |
|
|
| 7. | Toolbars
can a. | be
resized. | c. | change their
contents. | b. | be docked or floating. | d. | all of the above | | | | |
|
|
| 8. | To repeat
the previous command, you can press a. | ENTER. | c. | Both a and b | b. | SPACEBAR. | d. | None of the
above | | | | |
|
|
| 9. | Subjects
that are included in the "Learning Assistance" are a. | tutorials. | c. | AutoCAD Support
Online. | b. | AutoHelp. | d. | all of the above | | | | |
|
|
| 10. | The default
settings of AutoCAD a. | assumes that 0 degrees is to the right. | b. | assumes that angles
increase in the counterclockwise direction. | c. | both a and
b | d. | none of the
above | | |
|
True/False
Indicate whether the sentence or statement is true
or false.
|
|
| 11. | When using
the Use a Wizard option to start a new drawing, AutoCAD allows you to choose from two different setup
options.
|
|
| 12. | The Area
page allows you to set your drawing area's width and length, also known as the limits.
|
|
| 13. | The Advanced
Setup dialog box has three pages.
|
|
| 14. | The Angle
Direction page found in the Advanced Setup allows you to only draw in the counterclockwise
direction.
|
|
| 15. | The Wizard's
Area page does not permit you to use a point other than 0,0 as a lower left corner of the
limits.
|
|
| 16. | Any settings
that you change in the wizard can not be changed again later inside an AutoCAD drawing.
|
|
| 17. | When you use
a template to create a new drawing, AutoCAD copies all the information from the template drawing to
the new drawing.
|
|
| 18. | The default
limits, if MEASUREINIT is set to zero, are set to 0,0 for the lower left, and 12,9 for the upper
right corner.
|
|
| 19. | It is
possible to enter coordinates outside of the viewing area for AutoCAD to use for creating
objects.
|
|
| 20. | The status
bar at the bottom of the screen displays the cursor's coordinates and important information on the
status of various modes.
|
|
| 21. | The title
bar displays the current drawing name for the AutoCAD application window.
|
|
| 22. | A floating
toolbar can lie anywhere on the screen and can be resized.
|
|
| 23. | Toolbars can
only be docked at the top and left of the graphics screen.
|
|
| 24. | By default,
the Standard toolbar and the Object Properties toolbar are docked at the top of the graphics
window.
|
|
| 25. | AutoCAD
comes with 24 standard toolbars.
|
|
| 26. | The command
history area can be enlarged like other windows.
|
|
| 27. | AutoCAD
allows you to use certain commands transparently.
|
|
| 28. | The default
menu file is ACAD.MNU.
|
|
| 29. | An edit box
is an area that accepts an entry of several lines of text.
|
|
| 30. | When a
sub-dialog box appears, you must respond to the options in the sub-dialog box before the underlying
dialog box can continue.
|
|
| 31. | Selecting
one radio button will de-activate any other in the group.
|
|
| 32. | A check box
acts as a toggle.
|
|
| 33. | The HELP
command is a transparent command.
|
|
| 34. | Press the F2
function to invoke the HELP command.
|
|
| 35. | The NEW
command allows you to begin a new drawing.
|
|
| 36. | The OPEN
command allows you to open an existing drawing.
|
|
| 37. | You can open
and edit an AutoCAD Release 12, 13, or 14 drawing in AutoCAD 2002.
|
|
| 38. | AutoCAD 2002
can open multiple drawings in a single session.
|
|
| 39. | In
architectural and engineering units modes, the unit automatically equals one foot.
|
|
| 40. | The LIMITS
command allows you to place an imaginary rectangular drawing sheet in the CAD drawing
space.
|
